Filter
Top Products
Pelco Manual C1982M-A (12/00) [ 11 ]
BACK FOCUS ADJUSTMENT
The back focus adjustment is located at the front of the camera and is accessible from either side of
the case.
To adjust the back focus:
1. Loosen the two back focus locking screws (one on each side).
2. Turn the back focus ring:
a. Clockwise - Moves the CCD sensor assembly towards the back of the lens.
b. Counterclockwise - Moves the CCD sensor away from the lens.
3. When the back focus adjustment is satisfactory, tighten the locking screws. Do not over-turn or
force the back focus adjustment ring.
Figure 6. Back Focus Adjustment
BACK FOCUS
ADJUSTMENT
LOCKING SCREW
C
O
U
N
T
E
R
C
LO
C
K
W
IS
E
C
LO
C
K
W
IS
E
BACK FOCUS
ADJUSTMENT
RING