Filter
Top Products
Pelco Manual C1961M-B (3/01) 11
SPECIFICATIONS
GENERAL
CCD Sensor: 1/3-inch interline transfer
Picture Elements
CCC1300H-2,
MCC1300H-2: 768H x 494V
(approx. 380K)
CCC1300H-2X: 752H x 582V
(approx. 440K)
Sensing Area: 3/16 x 1/8 - inch
(4.7 mm x 3.5 mm)
Synchronize
System: AC Line lock
Horizontal Resolution
CCC1300H-2,
CCC1300H-2X: 470 TV lines
MCC1300H-2: 560 TV lines
Iris Control: Electronic/passive
Minimum
Illumination
CCC1300H-2,
CCC1300H-2X: 1.5 lux at f1.2, 75%
highlight reflectance,
at 77°F (25°C)
MCC1300H-2: 0.15 lux at f1.2, 75%
highlight reflectance,
at 77°F (25°C)
Electronic Shutter Speed
Signal-to-Noise
Ratio: >48 dB (AGC off)
Gain Control: Automatic
Vertical Phase: +66° +/-90°
Automatic Gain
Control: Selectable
Backlight
Compensation: Selectable
Scanning System
CCC1300H-2,
MCC1300H-2: 525 lines, 2:1 interlace
CCC1300H-2X: 625 lines, 2:1 interlace
Signal Processing: DSP
Auto Iris Lens
Type: DC/video control
Video Output: 1Vp-p, 75 ohms
Dimensions: 2.09 (W) x 2.17 (H) x
2.21 (D) inches
(53 x 55 x 56 mm)
ELECTRICAL
Power Requirements
CCC1300H-2,
MCC1300H-2: 24 VAC, 60 Hz
CCC1300H-2X: 24 VAC, 50 Hz
Power Connector: 3-pin terminal strip,
push-in type
Video Connector: BNC
Lens Jack: 4-pin connector
(miniature square)
Current Consumption
CCC1300H-2,
CCC1300H-2X: 240 mA
MCC1300H-2: 220 mA
MECHANICAL
Lens Mount: C/CS mount (Pelco
PCMA40 mount adapter
is needed to attach
C-mount lens)
Camera Mount: 1/4 x 20, top and bottom
of camera housing
POWER SUPPLIES
TF2000: 20 vA power supply,
24 VAC
MCS Series
Power Supply: Power supply for up to
16 cameras, 24 VAC
(Design and product specifications subject to
change without notice.)