Pelco MCC1380H-6 Digital Camera User Manual


 
14 C1963M (8/04)
SPECIFICATIONS
GENERAL
Imaging Device 1/3-inch interline
transfer CCD
Picture Elements
CCC1380H-6,
MCC1380H-6 768H x 494V
(approx. 380K)
CCC1380H-6X 752H x 582V
(approx. 440K)
Sensing Area 3/16 x 1/8 - inch
(4.7 mm x 3.5 mm)
Synchronization
System AC line lock/DC
internal
Horizontal Resolution
CCC1380H-6,
CCC1380H-6X 480 TV lines
MCC1380H-6 560 TV lines
Iris Control Electronic/passive
Minimum Illumination
CCC1380H-6,
CCC1380H-6X 0.7 lux at F1.2,
40 IRE, AGC on,
75% reflectance
MCC1380H-6 0.10 lux at F1.2,
40 IRE, AGC on,
75% reflectance
ESC 300:1
Signal-to-Noise Ratio >48 dB (AGC off)
Gain Control Automatic
Vertical Phase ±90°
Automatic Gain
Control Selectable
Backlight
Compensation Selectable
Scanning System
CCC1380H-6,
MCC1380H-6 525 lines,
2:1 interlace
CCC1380H-6X 625 lines,
2:1 interlace
Signal Processing DSP
Auto Iris Lens Type DC/video control
Video Output 1 Vp-p, 75 ohms
PHYSICAL
Dimensions 2.09 (W) x 2.17 (H) x
2.21 (D) inches
(53 x 55 x 56 mm)
Weight (without lens) 0.40 lb (0.20 kg)
ENVIRONMENTAL
Operating
Temperature 14°F to 122°F
(-10°C to 50°C)
Storage Temperature -40°F to 140°F
(-40°C to 60°C)
Humidity 20 to 80%
(noncondensing)
ELECTRICAL
Power Requirements
CCC1380H-6,
MCC1380H-6 24 VAC, 60 Hz/12 VDC
CCC1380H-6X 24 VAC, 50 Hz/12 VDC
Power Connector 3-pin terminal strip,
push-in type
Video Connector BNC
Lens Jack 4-pin connector
(miniature square)
Current Consumption 270 mA (24 VAC)/
390 mA (12 VDC)
MECHANICAL
Lens Mount C/CS mount (Pelco
PCMA40 mount
adapter is needed to
attach C-mount lens)
Camera Mount 1/4 x 20, top and
bottom of camera
housing
(Design and product specifications subject to
change without notice.)