Filter
Top Products
Pelco Manual C342M-D (8/05) 23
Figure 12. PT780 Series Dimension Drawing
11.10
(28.19)
.70
(1.78)
PELCO
8.50
(21.59)
9.60
(24.38)
Ø 4.00 (10.16)
Ø 3.50 (8.89)
1/4-20 D&T X .50 (1.27)
USABLE THREAD DEPTH
EQUALLY SPACED ON A 2.25 (5.72) B.C.
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES
Connectors: Amp CPC type, mate supplied (37 pins)
Motor Type
12 VDC models only: 12 VDC continuous duty. DC permanent magnet
All others: Single phase, instantaneous reversing, induction type.
120 VAC or 24 VAC, 50/60 Hz, impedance protected. 50%
duty cycle; 30-minute rating
Limit Switches: 5 amp, 250 VAC maximum, 10 million cycle rating, internal
adjustment
GENERAL
Construction
Pan/Tilt: Aluminum exterior; painted steel and aluminum interior
parts
Worm Gear: Delrin
™
premium performance acetal
Worm Drive: Ground and polished stainless steel
Dimensions: See Figure 12
Environment: Indoor/outdoor
-10° to 140 °F (-23° to 60° C)
Weight
Unit: 21.5 lb (9.68 kg) approximate
Shipping: 25 lb (11.32 kg)
Ratings: Meets NEMA Type 3R and IP54 standards
(Design and specifications subject to change without notice.)
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive
2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact
your local dealer for procedures for recycling this equipment.