Filter
Top Products
2 Pelco Manual C905M (2/96)
Figure 1. RMA14E Series Dimension Drawing
4.0 SPECIFICATIONS
Dimensions: See Figure 1
Construction: 14-gauge steel
Finish: Black or gray polyester powder coat
Weight: 9.31 lbs. (4.21 kg)
5.0 INSTALLATION
The rack kit is supplied unassembled. The following
hardware is provided for use in assembling the rack kit.
Qty Description
8 8/32 Hex nuts
8 #8 Lock washers
To install the rack kit and monitor, perform the follow-
ing steps:
1. Assemble the rack as shown in Figure 2 using the
supplied hardware.
While assembling, install all hardware loosely un-
til all components are attached and then finish by
tightening all hardware.
2. Set the monitor into the rack, aligning the four (4)
feet with the holes in the base plate.
3. Install rack and monitor as an assembly into con-
sole and make any required electrical connections.
4. Hold into place, aligning mounting holes of the
rack kit with mounting holes in console, and insert
and tighten required fasteners (not supplied).
14.08
(35.75)
19.00
(48.26)
14.08
(35.75)
2.19
(5.55)
.38
(.95)
13.25
(33.67)
13.88
(35.24)
14.00
(35.56)
47°
NOTE: THE VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES