Filter
Top Products
172
5
Editing and Printing Images
Optional Frames
The optional frames are stored in the CD-ROM (S-SW121) supplied with the
camera. To use these frames, copy them from the CD-ROM. These optional
frames are deleted if the files on the built-in memory are deleted with a computer
or if the built-in memory is formatted.
To Copy Frames
1
Remove the SD Memory Card from the camera.
If you leave the SD Memory Card in the camera, the frames will be
copied onto the card, not into the camera’s built-in memory.
2
Connect the camera to the computer using the
provided USB cable (I-USB7).
Refer to “Connecting to a Computer” (p.209) for instructions on
connecting the camera to a computer.
3
When the device detection window opens, click
[Cancel].
4
Insert the CD-ROM (S-SW121) into the CD-ROM drive.
5
When the installer window opens, click [EXIT].
6
If there is not already a “FRAME” folder in the root
directory of the camera (removable disk), create the
folder.
7
Copy the desired files from the FRAME folder in the
root directory of the CD-ROM to the FRAME folder on
the camera (removable disk).
For information on working with files on your computer, refer to the
instruction manual supplied with the computer.
8
Disconnect the USB cable from the computer and
camera.
Refer to “Connecting to a Computer” (p.209) for instructions on
disconnecting the cable.
Frames can be stored both in the built-in memory and on the SD
Memory Cards, but using large numbers of frames may slow down
processing speed.