Filter
Top Products
10
1 Turn your computer on.
2 Turn your camera off and connect it to the PC with the
USB cable.
Confirm that the SD Memory Card is inserted in the camera when
the images in the SD Memory Card are copied.
3 Turn your camera on.
The Device Detector screen is displayed automatically.
If the Device Detector screen is not displayed, display / copy the
images following the steps in “When the Device Detector screen is
not displayed” on page 12.
4 Confirm that [Copy images to
hard drive] and [Launch
ACDSee] are checked, and
click [Next].
Copying Images to your PC
e_00_pc_kb376.book Page 10 Thursday, April 8, 2004 1:25 PM