Philips KEY0079 Digital Camera User Manual


 
20
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for
repair.If you are unable to remedy a problem by following these hints, consult
your dealer or service center.
WARNING!
Do not dismantle the unit as there is a risk of electric shock! Under no
circumstances should you try to repair the set yourself, as this will invalidate the
warranty.
No picture is taken,but I press the shutter button all the way down
Built-in battery drained.
Charge the battery (see page 10)
Camera memory capacity full.
Transfer pictures / other files to your computer to free memory space
(see page 15-17)
Camera is connected to the PC’s USB port
Unplug the camera from the USB port
Poor light condition
Check the surrounding light conditions
The camera may have automatically powered off.
Switch the camera off and switch on again (see page 12)
No reaction to controls
Built-in battery drained.
Charge the battery (see page 10)
Unusually slow rate of file transfer to/ from my camera
Win XP OS operating on non-optimal Device Manager setting.
With your camera connected to your PC, modify your default setting by
clicking on the following:
1 From the taskbar,click Start Settings Control Panel System
System Properties Hardware Device Manager Disk
drives.
2 Select and double click on your camera model name Philips Keyring
0XX USB Device to enter the Philips Keyring XXX USB Device
Properties dialogue box (where X refers to your model number).