Philips SBC RU 510/87U Camera Accessories User Manual


 
4. Extra possibilities
Adding a function to the remote control
If you want to add a function to the RU510, you can contact the
Philips service line for Universal Remote Control to ask for the 3-figure code
for the extra function.
1 Keep 1 and 6 on the RU510 pressed. . . . . . . .
simultaneously for three seconds, until the
green LED flashes twice and then remains lit.
2 Press keys 9, 9 and 4, in that order.
3 Enter the 3-figure code which you received from the service line within
thirty seconds.
4 Press the key under which you want to store the new function.
The LED flashes twice.
The extra function has been successfully added to the RU510.
If you want to store the function under Shift in combination with
another key, first press the Shift key and then press the required
function key.
For restoring the original function of the key,
see ‘Restoring the original functions of your remote control’.
Restoring the original functions of your remote
control
1 Keep keys 1 and 6 on the RU510
pressed simultaneously for three seconds,
until the green light flashes twice and then
remains lit.
2 Press keys 9, 8 and 1, in that order.
The light flashes twice.
All original functions have now been restored
and any extra functions have been deleted.
M
E
N
U
O
K
SHIFT
123
456
78
0
9
SHIFT
123
456
78
0
9
SHIFT
123
456
78
0
9
SHIFT
123
456
78
0
9
9
Instructions for use
English
XP SBC RU 510/87.3 06-02-2004 12:36 Pagina 9