Filter
Top Products
EN
12
The Philips SPC220NC/SPC225NC video properties can be
changed:
- from within an application;
- by clicking the WebCam Video Viewer icon in the Windows
taskbar, bottom right of your screen, or
- by selecting ‘Advance’ in the WebCam Video Viewer. See
‘Operating the WebCam.
Most applications can show a 'live preview' video image on your
monitor. Always use this option to see the effect of changed
settings on your screen.
General settings
1 Flickerless
The Flickerless option should only be used under flickering
light conditions (e.g. fluorescent or neon lamps) to prevent
flickering or strangely colored video images.
If this option is used under normal lighting conditions the
video image may be overexposed.
2 Region
If you are using the Philips SPC220NC/SPC225NC in Europe,
select '50 Hz' and if you are using the Philips SPC220NC/
SPC225NC in North America, select '60 Hz'. For Asia this
setting is dependent on the local mains output. E.g. for China,
select ‘50 Hz’ and for Taiwan, select ‘60 Hz’. For Japan the
setting is region dependent.
Please check your local mains output to find the correct
‘Region’ setting.
1
2
WebCam settings