Filter
Top Products
7
2.2.2 Rear Panel
Audio Output Jack
DC Power Jack
Factory Default
LAN Socket
Audio Output
Jack
Audio-out Jack allows this device to output audio or alerting
sound.
DC Power Jack
The input power is 12VDC.
Note: Only use the power adapter supplied with ICA-501.
Otherwise, the product may be damaged.
LAN Socket
The LAN socket is a RJ-45 connector for connections to
10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This
Ethernet port built N-Way protocol can detect or negotiate the
transmission speed of the network automatically. Please use
Category 5 “straight through” cable to connect the ICA-501 to
a 100Mbps Fast Ethernet network switch or hub.
Note: If you need to connect the ICA-501 to PC or notebook
directly, you should use cross over cable instead.
Factory
Default Reset
This button is hidden in the pinhole. Please refer to the
Appendix A in manual for more information.