Filter
Top Products
5
LAN (PoE)
Connect your Camera to a 10/100Base-TX hub or switch. It is
compliant with IEEE 802.3af PoE. Either mid-span PSE or end-
span PSE supported.
4. Physical Installation
1. Connect an Ethernet cable
Connect one end of an Ethernet cable to the LAN port located on the IP camera’s
rear panel and connect the other end to the network device (hub or switch).
2. Attach the external power supply
Attach the provided power adapter to the IP camera’s connector labeled “DC 12V”
on the rear panel. If this camera is obtained power from PoE, you don’t have to
attach the power adapter.
Note
Please use the power adapter that is bundled in package. Using a
power supply with a different voltage rating will damage and void
the warranty for this product.
3. Connect Microphone and Speaker
If you will use the 2-Way audio function, please connect microphone to Audio In
and speaker to Audio Out.