Polaroid 403 Film Camera User Manual


 
Miniportrait 203/403 Camera User Guide
3
Film Holder 73A: This holder is shipped
with the Model 403 camera; additional
holders can be loaded with different film
types for easy interchangeability.
(PID# 612413)
Film Holder 73B: Allows use of a
validation plate. (PID# 612414)
Film Holder 73C: This holder is shipped
with the Model 203 camera; it is identical to
the 73A film holder except for the location
of the timer. (PID# 612415)
Underwriter’s Laboratories, Inc. (U.L.)
requires that the following safety
information be provided.
IMPORTANT
SAFEGUARDS
AS WITH ANY ELECTRICALLY
OPERATED EQUIPMENT, BASIC SAFETY
PRECAUTIONS SHOULD BE
OBSERVED. REMEMBER:
1. FOLLOW ALL INSTRUCTIONS.
2. DO NOT LEAVE UNIT UNATTENDED.
3. IF UNIT WILL NOT BE USED FOR
EXTENDED PERIOD OF TIME,
REMOVE BATTERIES; IF USING AC
ADAPTER, UNPLUG UNIT FROM
ELECTRICAL OUTLET. GRASP
PLUG, NOT CORD, AND PULL TO
DISCONNECT FROM OUTLET.
4. DO NOT OPERATE UNIT WHICH HAS
BEEN DROPPED OR DAMAGED,
UNTIL IT HAS BEEN EXAMINED BY
AUTHORIZED SERVICE CENTER.
5. BEFORE STORING, ALLOW UNIT TO
COOL COMPLETELY.
6. TO AVOID ELECTRICAL SHOCK
HAZARDS, DO NOT IMMERSE UNIT
IN WATER OR OTHER FLUIDS. DO
NOT OPERATE UNIT NEAR WATER
OR WITH WET HANDS. IF SERVICE OR
REPAIR WORK IS REQUIRED, CONTACT
AUTHORIZED SERVICE CENTER.
INCORRECT REASSEMBLY CAN CAUSE
ELECTRIC SHOCK WHEN UNIT IS USED
SUBSEQUENTLY.
7. CLOSE SUPERVISION IS
NECESSARY WHEN UNIT IS USED
BY OR NEAR CHILDREN.
8. THE USE OF ACCESSORIES OTHER
THAN THOSE RECOMMENDED MAY
CAUSE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY.
PLEASE KEEP
THESE
INSTRUCTIONS.
Validation Plate (4): For use with the 738
film holder; plate may be custom-printed for
more secure identification pictures.
(PID# 612410)
AC Adapter (5): Enables the camera to
use electrical power, rather than batteries.
Important: The use of other AC adapters
may damage the camera.
(PID# 612411
for 120-volt supply, PID# 612427 for 220-
volt supply, PID# 612698 for 240-volt
supply, PID# 612559 for 100-volt supply)
Auxiliary Camera Sync Cord (6): Allows a
second camera to be synchronized with the
camera. (PID# 612409)
Flash Sync Adapter: The adapter is
shipped with the camera. It is designed to
reverse the polarity of an external flash
unit, to make it compatible with the
camera’s built-in flash. (PID# 613249)
The accessories are available from your
Polaroid Camera Dealer, or contact the
nearest Polaroid Office.