Filter
Top Products
9
English
If the flash or focus is not correct. . .
When the caution symbol and the following error indicators appear:
•
Your subject is too close. The number “0.1” is displayed. Release
shutter button and stand at least 0.6 m (2 ft.) from subject.
•
Your subject is beyond flash range. A number from 4.8 to 6.2 is
displayed. Release shutter button and position your subject within
the 0.6 m to 4.6 m (2-15 ft.) flash range.
•
Your subject is within range, but the flash is off. A number from
0.6 to 4.6 is displayed. Slide the flash switch up to turn flash on.
Note
:
Distance readings do not appear when subject is beyond
6.2 m (20 ft).
Using Self-timer
Place camera on tripod or other secure surface and set up photo.
Press shutter button halfway and release button. Slide self-timer
switch down. You have 12 seconds before self-timer activates
shutter release. Camera beeps and red light flashes for 10 seconds,
then beeps steadily and red light shines continuously for an addi-
tional two seconds before taking photo.
Slide self-timer up. Photo ejects automatically.
Note:
To avoid double exposure, do not close camera before
sliding self-timer up.
Matrix.book Page 9 Monday, October 20, 2003 5:10 PM