Filter
Top Products
44
Polaroid PDC 3070 Digital Camera User Guide
www.polaroid-digital.com
I get a blurred image when
uploading my images to
my computer.
There may be a momentary
delay between pressing
the shutter button and the
actual exposure.
Hold your PDC 3070 camera
steadily until you hear a “beep”
which indicates the exposure is
completed.
The battery indicator icon
on the 1.4” LCD screen
will go “blank”.
This means there is
insufcient power.
You need to change the new
batteries.
My image quality is
grainy.
You may have selected
the wrong camera
frequency setting.
Using the different frequency
setting.
Pal for 50 Hz
NTSC for 60 Hz
My CD installation wizard
does not work.
The auto installation le
is switched to off.
Or
The CD ROM is
disconnected.
Go to the computer desktop,
Right click on “My Computer”.
Click “Properties”. Select “Device
Manager”. Double click on “CD-
ROM”, double click on "CD-R"
(Normally the manufacturer’s
name). Click on " Setting “. Ensure
"Auto insert notication " is ticked
and the " disconnect " is ticked.
If you change the settings the
computer will ask you to restart
your PC. Click " Yes " (Only for
Windows® 98SE & Me user)
The LCD on my PDC 3070
Camera has frozen when
you insert a SD card into
your PDC 3070 camera.
No response from any of
the function buttons.
Ensure you only use a new or
formatted SD card for use with your
PDC 3070 camera.
No web camera function. The camera is set to
Playback mode
Or
Have not installed the
PDC 3070 Driver.
Set the camera to Capture mode
Or
Install the PDC 3070 Driver.
The Flash icon and the
image counter on the LCD
is ashing after I took my
last image using the Flash
Mode.
The PDC 3070 Camera
is processing the image
and recharging the ash
unit.
Wait for the ash icon on the status
LCD to stop ashing and then take
another image.
Symptom Problem Solution
AVI le cannot be played.
DirectX version is lower
than 8.0
Install directx 8.0 or above. Visit
http://www.microsoft.com/directx for
more detail.
When connect the camera
to the PC in Capture
mode, Windows prompt to
insert system disk.
PDC 3070 driver
installation has not
completed.
Insert the Windows CD or PDC 3070
driver CD. If PDC 3070 driver CD is
inserted, please set the path to “CD-Rom
drive\software\Driver\Sysle”. And
continue the installation.
Please also refer to the help les & User Guide that accompany the enclosed applications. For further information
and support, please visit our website: http://www.polaroid-digital.com.