Filter
Top Products
EN-28
Protecting Images
To prevent images from accidentally being erased, follow the steps below:
1. Press the [7] button.
2. Select the image that you want to protect with the
e / f buttons.
3. Press the MENU button.
4. Select [Protect] with the c / d buttons, and press
the SET button.
5. Select [Single] or [All] with the c / d buttons, and
press the SET button.
6. Select [Set] with the c / d buttons, and press the
SET button.
Protection is applied to the image and the
camera returns to the playback mode.
The protect icon [A] is displayed with protected
images. When [All] has been selected, [A] is
displayed on all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on the LCD display you want to remove the
protection.
1. Select [Protect] with the c / d buttons from the
playback menu, and press the SET button.
2. Select [Single] or [All] with the c / d buttons, and
press the SET button.
3. Select [Cancel Protect] with the c / d buttons, and
press the SET button.
The removal of image protection is executed and the camera returns to the
playback mode.
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.