Filter
Top Products
INSTALLATION INSTRUCTIONS
NOTES:
Attach the appropriate adapter
ring to the threads on your lens.
Tighten rmly.
Align the bottom of the lter
holder and slide it into the
adapter ring.
Lift the locking pin and
completely install the lter
holder onto the adapter ring.
The lter holder should be
able to smoothly rotate around
the diameter of the adapter ring.
• The included lter holder will hold 100mm lters (2mm thick).
For other sizes please use clips.
• Due to the materials used, rotating the filter holder may result
in a squeaking or sliding noise. This is not a defect.
• You can use this accessory to hold 2 filters simultaneously.
Please purchase additional adapters if you require more.
Slide in the desired lters.
Adjust height and angle for
perfect exposure.
1
4 5
2 3
140mm