Quasar VM-L152 Camcorder User Manual


 
27
Special Features
1Press D. ZOOM.
once D.ZOOM 1 (150× maximum)
twice D.ZOOM 2 (700x maximum)
The Higher digital magnification levels
may cause picture distortion.
2Hold down “T” on POWER ZOOM.
Digital Zoom starts when normal zoom
reaches maximum (20×).
• Zoom level appears in EVF.
• POWER ZOOM switch controls digital
zoom level.
• Normal zoom resumes when level falls
to 20×.
3Press D. ZOOM to turn off Digital Zoom
so no indication appears.
Digital Zoom
Power Zoom magnification is digitally
increased.
Before you begin...
Connect Camcorder to power source.
Set POWER to CAMERA.
2
1, 3
Digital Electronic Image Stabilization (E.I.S.)
1Press EIS to display “EIS” in the EVF.
• Image becomes slightly enlarged and
shutter speed auto-adjusts from 1/80 to
1/350 according to brightness.
• Use High Speed Shutter (page 24) if
needed. Shutter speed setting remains
after EIS is canceled.
2Press EIS again to cancel when not in
use.
E.I.S. may not function during...
• extreme Camcorder movement.
• recording of subjects with distinct horizontal
or vertical stripes.
• low light situations (EIS indicator flashes).
• intense fluorescent lighting situations.
• recording of very fast motion.
Helps stabilize picture when recording in
unstable situations.
Before you begin...
Connect Camcorder to power source.
Set POWER to CAMERA.
NORMAL
Digital EIS ON
1, 2
05.L152 Special p22-28 02.2.18, 1:38 PM27