Filter
Top Products
9
Notes:
• To protect the tape and conserve battery
power, the camcorder turns itself off if you
pause the tape for more than 5 minutes. To
turn the camcorder back on, press
REC/
PAUSE
.
• For more information about recording with
your camcorder, be sure to read all the sec-
tions under “Special Video Recording Fea-
tures” on Page 18.
VIEWFINDER PLAYBACK
After you make a recording, you can play it back
through the viewfinder. (Of course, you can also
press
STOP/EJECT
, remove the tape, and play it
in any VHS VCR).
1. Slide
POWER
to
VCR
. The POWER indica-
tor lights.
2. Press
REWIND
to return the tape to the
beginning or to the place where you want to
begin playback. See “Digital Counter” on
Page 21.
3. Press
PLAY
and watch the picture in the
viewfinder. See “Special VCR Features” on
Page 26.
Note: You cannot hear the tape’s audio
recording during viewfinder playback. To
hear sound, play the tape through a TV/
monitor or on a VCR. See “Connecting the
Camcorder to a TV” on Page 32.
4. Press
STOP/EJECT
to end playback.
5. To remove the cassette, press
STOP/EJECT
again.
Note: Except when you are recording, you
can eject a cassette any time power is con-
nected to the camcorder, whether or not the
POWER indicator is lighted.
16-830.fm Page 9 Wednesday, July 21, 1999 9:32 AM