Filter
Top Products
Playback
Chapter 4 47
Using Counter Memory
Counter Memory makes it easier to locate a specific
tape segment.
1. Press and hold the COUNTER R/M button for
more than 1 second. (The counter resets to
0:00:00.)
2. Press COUNTER R/M for less than 1 second. (M
appears.)
3. After recording or playback, press , then .
(The tape automatically stops at or near 0:00:00.)
4. Press
/
to start playback.
• The counter memory functions both in the Fast-
Forward and Rewind modes.
• To disable the Counter Memory Function, press
COUNTER R/M for less than 1 second until M
disappears.
Still Playback Mode
Still playback pauses the tape, freezing a
single frame.
1. Press the Play/Pause button (
/
) during playback
to freeze the image.
2. To resume normal playback, press the Play/
Pause button again.
• Video “noise” appears on the screen and the
picture may become monochrome during still
playback. This is normal.
• If pause continues for more than a few
minutes, the camcorder may turn off.
• After approximately 5 minutes in stop mode,
the power turns off automatically.
CHARGE
STOP R RETAKE F
COUNTER R/M
FADE/W
IPE
P. AE
DIGIFECT
POWER
REFRESH
EJECT
Playback buttons
COUNTER R/M
button