Filter
Top Products
61
Playback
Time Counter
The time-counter display shows the
actual time elapsed when playing back a
segment of tape. The memory-stop
feature helps locate a certain point on the
tape. Turn memory stop on to stop the
tape automatically during rewind or fast
forward when the time counter reaches
M 0:00:00.
To Use the Memory-Stop Feature
1. Locate the place on the tape you want
to return to, set the POWER switch to
VCR, and press COUNTER R/M for
more than two seconds to reset the
counter to 0:00:00.
2. Press COUNTER R/M for less than
one second to turn the time counter’s
memory-stop feature on or off. When
memory stop is on, an M appears
before the time counter.
Playback Features (continued)
3. Continue to play the tape. When you
want to return to the place you
marked, press the STOP button.
4. Press REW . The tape rewinds to
the time counter reading of
M 0:00:00.
Time Counter With Memory
Stop Turned On
M 0:00:00
Tracking
During playback, streaks may appear in
the playback picture. Press both tracking
buttons (P.AE and FADES buttons) to
activate manual tracking mode. Press
either button again until the streaks
disappear. MT appears during manual
tracking.
Press both tracking buttons again to turn
automatic tracking back on. AT flashes in
the viewfinder for a fiew seconds and then
disappears.
Note: The tracking buttons may have no effect
on tapes recorded on other camcorders or VCRs.
Manual Tracking Indication
in Viewfinder or on LCD Monitor
MT
Auto Tracking Indication
in Viewfinder or on LCD Monitor
AT