Ricoh 06576 Digital Camera User Manual


 
3
57
Shooting
The following settings for the white balance can be set in the
E2 menu.
You can measure the white balance at a selected location.
1 Select o in Step 2 of
“Setting the White Balance”
(p.56).
2 Under the light you wish to measure the white
balance of, select a white area as the subject,
and press 0 fully.
The captured image is displayed.
3 Use ABCD to specify
the measuring area.
4 Press E.
The White Balance setting screen reappears.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press E to remeasure
the white balance and return to Step 3.
t Memo
You can copy the white balance settings of a captured image
and save them as manual white balance settings in [Save as
Manual WB] of the playback mode palette. (p.64)
10 WB Adjustable Range Fixed, Auto Adjustment
11 WB When Using Flash
Auto White Balance, Multi
Auto White Balance, Flash,
Unchanged
12 AWB in Tungsten Light
Strong Correction, Subtle
Correction
13 Color Temperature Steps Kelvin, Mired
Adjusting the White Balance Manually
WB
±
WB
±
Manual White Balance
Manual White Balance
Cancel
Cancel
Adjust
Adjust
Check
Check
OK
OK
Cancel
Cancel
OK
OK
e_kb558_om.book Page 57 Tuesday, September 16, 2014 11:59 AM