Rollei 35 Digital Camera User Manual


 
Practical Hints
[Return to Manual index] [Previous page] [Next page]
7. Pre-selecting apertures
According to the type of subject you can line up the
matching pointer 17 with the meter needle by turning
either the aperture dial 5 or the shutter speed dial 1.
With moving subjects pre-select the exposure time to
make sure of a suitably fast shutter speed Then match up
the pointer by turning the aperture dial.
If on the other hand depth of field is more important (see
hint 8), determine the required aperture and preselect this
Now match up the pointer 17 by turning the shutter speed
dial 1. If necessary complete the exact matching with the
aperture dial 5 to get a speed value in clickstop position.
In every case the camera must point at the subject while
you line up the pointer.
[Return to Manual index] [Previous page] [Next page]
All this informations, texts, and Images were extracted from the "Rollei 35/35T/35S In Practical Use" and
only intends to give some orientation to new users that didn't had access to the original manual. (c)
Rollei-Werke Franke & Weidecke