Filter
Top Products
- 4 -
G. Start/Function Key
H. Battery Box
Install Battery
1. Open the battery box.
2. Load the batteries correctly: when you load the batteries, please place one
battery according to the pole directions for batteries on the battery box;
3. Close the battery box cover.
Note:
1. When you use the USB cable to connect the camera with a computer, is
unnecessary to use the batteries because the camera use the power provided by
the computer through the USB interface.
2. Before you use the PC camera functions, please download all photos in
the camera to your computer, which will avoid pictures missing
3. Please pay attention to that the reasonable distance between you eyes and
viewfinder is about 30cm
Warning
1. Don’t open the battery box at will, and the power cut will cause the photos
in the camera missing.
2. If you don’t use the camera for a long time, please take out of the batteries
for fear of the discharging or corrosion of the batteries;
3. Please don’t put the battery into fire for fear of explosion to cause
4. When the power of battery lower 1.2V,the symbols in LCD will flash
indicating the power shortage