Filter
Top Products
- 11 -
To conserve battery power, if the camera is not used for 30 seconds, it will automatically switch off.
Installing Spider-Man Photo Lab Software
Before attempting to install the software, make sure that you do not have the camera or the USB
cable attached to your computer. This may cause your installation to fail. Do not connect the cable
to the computer until the entire installation process has been completed. We suggest you follow the
step by step instructions that will appear on your screen during the installation process.
Software & Camera Driver Installation
1. Insert the CD into your CD-Rom drive. Make sure that your camera is not connected to the
computer.
2. On the “Install your camera software” screen, select your camera model from the drop
down list and click the “Install” button to install Spider-Man Photo Lab and your camera driver.