Samsung D354(i) Camcorder User Manual


 
ENGLISH
8686
USB Interface (VP-D352(i)/D353(i)/D354(i)/D355(i) only)
To use USB streaming, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.
You can view Camcorder video on your PC using USB streaming.
You can also store it as a moving picture in the "avi" file format, or as a still image in the "jpg" file format on a PC.
1. Set the Mode switch to TAPE(VP-D353(i)/D354(i)/D355(i) only), set the Power switch to CAMERA or PLAYER.
2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB port on your computer.
3. Setup and execute Windows Movie Maker or the Ulead VIDEO Studio Software application provided on the CD.
- For detailed instructions for Ulead VIDEO Studio use, refer to the program’s Help function.
- Windows Movie Maker is used for WINDOWS ME and XP users. (C:\program files\Movie maker\moviemk.exe)
You can easily transfer data from a Memory card to a PC without additional add-on cards via a USB connection.
1. Set the Mode switch to MEMORY CARD, set the Power switch to CAMERA or PLAYER.
2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB port on your computer.
3. To verify whether the removable disk has been properly recognised, open Windows Explorer and locate the removable disk.
1. Connect a USB cable to the USB port on the PC.
If a USB cable is connected to the Camcorder's USB port, nothing is displayed on a TV.
2. Connect the other end of the USB cable into the USB jack on the Camcorder. (USB jack)
If a PC is connected to the Camcorder with a USB cable only, Zoom switch and NITE PIX operate.
After completing the data transmission, you must disconnect the cable in the
following way:
1. Select the removable disc icon and click the right mouse button to select [Eject].
2. Select [Confirm] and disconnect the USB cable when the Windows Splash screen
appears.
[ Notes ]
If you disconnect the USB cable from the PC or the Camcorder while transferring,
the data transmission will stop and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices,
the Camcorder may not work properly.
If this occurs, remove all USB devices from the PC and reconnect the Camcorder.
While transmitting data from the Camcorder to PC at strong electric field and strong magnetic field, VIDEO signal or AUDIO signal
may transmit with noise.
Using the USB Streaming Function
Using the removable Disk Function (VP-D353(i)/D354(i)/D355(i) only)
Connecting to a PC
Disconnecting the USB Cable
DV
USB
AV
MIC
DV
USB
AV
MIC
USB Cable