Filter
Top Products
ADVANCED
SETTING UP THE SHOOTING FUNCTION
SHOOTING
This allows continuous shooting.
In this mode, you can take moving subjects continuously.
Once a continuous shooting sequence has been completed, the camera resets to single
shooting mode.
1. Turn the camera on.
2. Rotate the mode dial to STILL IMAGE mode.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display [STILL IMAGE 1/2]
menu on the LCD monitor.
5. Select [STILL IMAGE 2/2] menu by pressing the
LEFT (
) / RIGHT ( ) buttons.
6. Press the DOWN button( ) and select [SHOOTING].
7. Shift the cursor to the [SHOOTING] sub menu by
pressing the RIGHT button ( )
8. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is SINGLE.
9. After selecting the desired sub menu, press the OK
button to confirm the setting.
The number of shots in the continuous sequence will
show if you select the [CONTINUOUS] icon and then
press the OK button.
Select the number of continnous shots required.
STILL IMAGE 2/2
BACK : SET : OK
SINGLE
CONTINUOUS
SHOOTING
EXPOSURE
ISO
W.BALANCE