Filter
Top Products
CAMERA WORKING MODE
Camera working mode
You can select the desired working mode by using the mode dial located on the top of the
camera.
This digital camera has 6 working modes. These are listed below.
STILL IMAGE mode ( )
This mode is used for taking still images from 0.8 ~ infinity and
taking a moving subject continuously.
MACRO SHOT mode ( )
This mode is used for macro shots between 0.2m ~ 0.8m and
taking a moving subject continuously. The flash mode is
changed to FLASH OFF when this mode is selected, but you
can change the flash mode.
MOVIE CLIP mode ( )
This mode is used for movie clips.
The flash is changed to FLASH OFF when this mode is selected.
PLAY mode ( )
In this mode, the stored images on the CF CARD can be viewed on the LCD monitor on
the back of the camera or on an external monitor using a video output terminal. If you view
an image which has additional sound recording, the sound will play back whilst the image
is viewed.You can use single image play back, 6 thumbnail screen, slide show, one image
deletion, all image deletion , sound recording and digital zoom in this mode.
PC mode ( )
Your computer will recognize the camera as a Removable Disk when connected by the
USB cable. You can transfer images between the computer and the camera.
SETUP mode ( )
In this mode, you can set up basic settings such as format, auto power off, date / time,
beep sound, video out and language.
Mode dial information