Filter
Top Products
Wireless network
127
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon Description
WPS AP
Secured AP
Signal strength
Press [
t
] to open AP setting options
•
When you select a secured AP, a pop-up window appears.
Enter the required passwords to connect to the WLAN. For
information about entering text, refer to "Entering text". (p. 130)
•
When a login page appears, refer to "Using the login browser".
(p. 129)
•
When you select an unsecured AP, the camera will connect
to the WLAN.
•
If you select a WPS profile supported AP, select WPS PIN,
and then enter a PIN on the AP device. You can also connect
to a WPS profile supported AP by selecting WPS button
connection on the camera, and then pushing the WPS
button on the AP device.
Connecting to a WLAN
1
Rotate the mode dial to
w
.
2
Select , , , , or .
3
Press [
m
], and then select Wi-Fi Setting.
•
In some modes, press [
m
] or follow the on-screen
instructions until the AP Setting screen appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Refresh
Samsung 2
Samsung 1
Samsung 3
Add wireless network
WPS button connection
Back
•
Select WPS button connection to connect to a WPS AP.
•
Select Refresh to refresh connectable APs.
•
Select Add wireless network to add an AP manually.