Filter
Top Products
73
Quick view
If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
- Sub menus
[Off] : The quick view function
can’t be activated.
[0.5, 1, 3 sec] : The captured image is
briefl y displayed during the
selected time.
Formatting a memory
This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
- Sub menus
[No]
: The memory will not be formatted.
[Yes] : A window is displayed to confi rm the
selection. Select the [Yes] menu. A
[Processing!] message appears and
the memory will be formatted. If you
run FORMAT in Play mode, a [No
Image!] message will appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a fi le this camera can’t recognise or one that
has been taken from another camera.
- Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras, memory
card readers, or PCs, you will get a [Card Error!] message.
LCD save
If you set the [LCD save] to On and the camera isn’t operated during the
specifi ed time, the LCD monitor will be turned off automatically.
- Sub menus
[Off]
: The LCD monitor will not be turned
off.
[On]
: If the camera isn’t operated during
the specifi ed time (about 30 SEC.),
the camera power will be idle
(Camera status lamp:Blinking)
automatically.
K You can’t set the [LCD save] menu of Playback Mode.
SETTINGS (
)
DISPLAY ( )
Off
1sec
3sec
0.5sec
Back Set
DISPLAY
Language
Date & Time
Start Image
LCD Bright
Quick View
LCD Save
Back Set
Ye s
No
SETTINGS
Reset
Format
File
Power Off
Video Out
Imprint
Back Set
On
Off
Language
Date & Time
Start Image
LCD Bright
Quick View
LCD Save
DISPLAY