Filter
Top Products
Viewing les on a TV or HDTV
Playback/Editing
96
6
Turn on your camera.
•
If you have an Anynet+ compatible Samsung HDTV and you have turned
on your camera’s Anynet+ function, the HDTV turns on automatically and
displays the camera screen, while the camera automatically enters Playback
mode.
•
If Anynet+ is o in your camera or your TV does not have Anynet+, the TV
does not turn on automatically. Turn the TV on manually.
7
View les using the buttons on your camera or, if the TV has
Anynet+, the remote control of your HDTV.
•
If your HDTV supports the Anynet+(CEC) prole, turn Anynet+ on in the camera’s
settings menu (p. 107) to control the camera and TV with the TV’s remote
control.
•
Anynet+ lets you control all connected Samsung A/V devices with the TV remote
control.
•
The time it takes for the camera to connect to your HDTV may vary with the
type of SD, SDHC, or SDXC card you use. A faster SD, SDHC, or SDXC card will not
necessarily result in a faster HDMI transfer, because the main function of the card
is to improve the transfer rate during shooting.
Viewing les on an HDTV
You can view high-quality and uncompressed photos or videos on an HDTV using
the optional HDMI cable. HDMI (High Denition Multimedia Interface) is supported
by most HDTVs.
1
Rotate the mode dial to .
2
Select Connectivity → HDMI Size.
3
Select an HDMI resolution. (p. 107)
4
Turn o your camera and HDTV.
5
Connect your camera to your HDTV with the optional HDMI cable.