Filter
Top Products
Connecting to a WLAN and configuring network settings
74
Wireless network (HMX-QF20 only)
Manually setting the IP address
By entering the IP address, you can connect to a WLAN via an AP
(access point) in the wireless network service area.
1
Press the [Home ( )] button
p
touch Social Sharing.
2
Touch the Wi-Fi setting ( ) tab.
The camcorder automatically searches for available AP devices.
3
Touch the tab next to an AP.
4
Touch IP Setting
p
Manual.
Subnet Mask
DNS Server
Gateway
IP
IP Setting
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
•
5
Touch each submenu item and then enter the required value
using the virtual keyboard.
¬
page 75
Item Description
IP
Enter the static IP address.
Subnet Mask
Enter the subnet mask.
Gateway
Enter the gateway.
DNS Server
Enter the DNS address.
6
Touch the tab.
The camcorder connects to the network via the selected AP.
For more information about the network settings, contact the network
administrator or the service provider.
The network settings may differ, depending on network conditions.
Do not try to connect to a network that you have no permission to
access.
Use a fully charged battery while you are using network services.
•
•
•
•
•