Samsung L903 Camcorder User Manual


 
ESPAÑOLENGLISH
57
Multi Playback (using a PAL60 System) Multi reproducción (usando un sistema PAL60)
Playing back a Tape
Reproducir una cinta
This Camcorder can convert an NTSC tape recorded in the
SP mode to the PAL60 format, allowing you to view it on a
PAL TV which has Vertical sync adjustment circuitry for 60Hz.
- PAL60 is a special output signal format with which a PAL
TV can be used to view a tape recorded by an NTSC
recorder.
1. Set power switch to PLAYER mode.
2. Insert an NTSC tape you want to see.
3. Press MENU ON/OFF button, then the MENU list will appear.
4. Turn the UP/DOWN dial to PAL CONV. ......OFF.
5. Press ENTER, then it will change to
PAL CONV. ......PAL60.
Now you can see the picture by pressing the PLAY button.
6. Press MENU ON/OFF button to end setting.
Notes: 1. This Camcorder can not record using the PAL60
system.
2. When an NTSC tape is being played back, the picture
on the monitor screen shrinks in the Vertical direction.
3. If the signal recorded on the tape is in bad condition,
the PAL60 playback system may malfunction.
4. A PAL recorded tape can not be normally played back
when PAL60 is set or displayed.
Esta videocámara puede convertir una cinta grabada en
NTSC modo SP, en formato de señal PAL60, permitiendo
verla en un PAL TV el cual tiene sincronía vertical ajustada a
una red de circuitos para 60Hz.
- PAL60 es un formato especial de salida de señal con la
cual una PAL TV puede ser usada para ver la grabación
de una cinta previamente grabada en NTSC.
1. Ponga el interruptor de poder (POWER) en el modo PLAYER.
2. Inserte la cinta NTSC que desea ver.
3. Presione el botón de MENU ON/OFF, y aparecerá la lista del
menú.
4. Gire la perilla de UP/DOWN a PAL CONV. ......OFF.
5. Presione ENTER, y se cambiara a PAL CONV. ......PAL60.
Ahora podrá ver la imagen presionando el botón de PLAY.
6. Presione el botón de MENU ON/OFF para terminar.
Notas: 1. Esta videocámara no puede grabar usando el
sistema PAL60.
2. Cuando una cinta NTSC esta siendo reproducida,
la imagen en la pantalla se encogerá en dirección
vertical.
3. Si la señal grabada en la cinta es de mala calidad,
la reproducción del sistema PAL60 podría
malfuncionar.
4. Una cinta grabada en PAL normalmente no puede
ser reproducida cuando PAL60 este puesto o
mostrándose.
00732C SCL901 USA+ESP(46-70) 1/14/04 8:38 AM Page 57