Filter
Top Products
ENGLISH
147147
✤ 0 Samsung
/0
0
0
0
0 0
USB 0
0
0
0
0
0
0
Memory Full!
Paper Error!
Print Error!
Ink Error!
Connect USB
Cable!
Low Battery!
Card Error
Not formatted!
Write Error!
Read Error!
Protect!
0
0
0
0
0
0
USB 0
0
0
SD 0
SD 0
SD 0
/0
0
0
/
SD 0
0
0
0
0
/0
0
0
0
0
0
0
24 0
0
/ 42 0
<Auto>0
0
0
33 0
0
69 0
Troubleshooting : Self-Diagnosis Display
Self-Diagnosis Display
Checklist
✤ Before contacting service personnel, please read and check following table. If the problem
continues, contact your nearest Samsung dealer or authorised service center / personnel.
Symptom Possible Causes Measure
Not enough free space for saving files.
The paper is not inserted or set
improperly.
Paper jam or other printing error
occurred.
Ink is low.
USB cable is not connected or set
improperly.
Battery Power is low.
The mini SD card is not inserted or
damaged.
The mini SD card is not formatted.
Failed to write a file.
Failed to read a file.
The file is protected.
Memory Full!
Paper Error!
Print Error!
Ink Error!
Connect USB
Cable!
Low Battery!
Card Error
Not formatted!
Write Error!
Read Error!
Protect!
Check the space of internal memory or
the external memory.
Check the paper in the printer.
If there is no paper, insert paper.
Check the printer message. Refer to the
printer manual for details.
Replace ink or toner.
Check the USB connection. Disconnect
and try to connect again.
Charge the Battery Pack or connect the
AC Power Adapter.
Replace the mini SD card.
Format the mini SD card or replace with a
formatted one.
Check the memory space or format of the
mini SD card.
Delete the damaged / corrupted file.
To delete a protected file, unlock the
protection prior to deletion.
Informs that…
Action
Display
No Power is supplied.
Date/Time is wrong
Focus does not adjust
automatically
The mini SD card will
not load properly.
Color balance of the
picture is not natural.
The power is not connected properly.
The battery is dead.
The battery is too cold.
The Date/Time is not set.
Focus mode is set to manual.
Recording was done in a too-dark place.
Lens is covered with condensation.
The mini SD card is inserted improperly.
Foreign substances are in the memory
slot.
White balance setting is not suitable
for the recording situation.
Connect the AC Power Adapter
properly, page 24
Replace with a new Battery Pack.
Warm up the battery or move it to a
warmer place.
Set the Date / Time, pages 42
Set the focus mode to <Auto>.
Use a strobe or light the place.
Clear the lens and check the focus.
Insert the mini SD card properly,
page 33.
Clear the memory slot.
Set proper white balance, page 69.