Filter
Top Products
System Menu Setting
[ENGLISH
+ Beforeyou begin:Make sure that there is no tape inserted in theCamcorder. (See page 36)
4, Demonstration automaticallyshows you the major functions that are included with your
Camcorderso that you may use them moreeasily.
+ The Demonstrationfunction may only be used in the Cameramode without a tape insertedin the
Camcorder.
+ The Demonstration operates repeatedly untilthe Demonstration mode switched off.
1. Set the Power switch to CAMERA.
2. Set the Modeswitch to TAPE.
3. Pressthe MENU button.
• The menu listwill appear.
4. Movethe Menu selector to theleft or rightto select System, then pressthe Menu selector.
5. Movethe Menu selector tothe left or rightto select Demonstration, then press the
Menu selector.
\
6. Movethe Menu selector to the left or rightto select On, then press the Menu selector.
7. Pressthe MENU button.
• The Demonstration willbegin.
8. Toquit the Demonstration,pressthe MENU button.
[ Notes ]
• The Demonstration mode is automatically activated when the Camcorder is left idle for more than
10 minutes after switching to the Camera mode (no tape is inserted in the Camcorder).
• If you press other buttons (FADE, BLC, PHOTO, EASY.Q, COLOR NITE/PB ZOOM) during the
Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later ifyou do not
operate any other functions.