Samsung SBC-331A Security Camera User Manual


 
6
User Guide
Connecting Auto Iris Lens Connector
Prepare the following Auto Iris Lens Connector
supplied with the camera.
Connect the cable of the control cable, whose
covering is stripped, to the Auto Iris Lens Connector
as shown below.
Pin Number DC Control Type Video Control Type
1 Damp(-) Power Source (+9V)
2 Damp(+) Not used
3 Drive(+) Video Signal
4 Drive(-) GND
User Guide
5
Rib
Pin1
Pin2
Pin3
Pin4
Mounting the Lens
Loosen a screw fixing the Flange Back Adjustment
Ring by turning it counterclockwise and turn the
Adjustment Ring to the "C" direction
(counterclockwise) until it stops. Failure to do so
may result in a damage caused by the bump of the
lens against the image sensor part in the camera
when mounting the lens.
LEN
S
D
C
V
ID
E
O
C Direction
Auto Iris
Control Cable