Filter
Top Products
ENGLISH
3939
Basic Recording
Zooming In and Out
Using the Tele Macro
✤ The Zoom function works in both <Camera> and <M.Cam> modes. ➥page 19
✤ Zooming is a recording technique that lets you change the size of the subject in a scene.
✤ You can zoom using variable zoom speeds.
✤ Use these features for different shots. Please note that over-use of the Zoom feature can lead to unprofessional looking
results and a reduction of battery usage time.
1. Move the [Zoom] lever slightly for a gradual zoom,
move it further for a high-speed zoom.
■
Your zooming is monitored on the OSD.
2. [T] (Telephoto) side: Subject appears closer.
3. [W] (Wide angle) side: Subject appears farther away.
■
You can record a subject that is about 10mm (about
0.5 inch) away from the lens surface in the Wide position.
✤ Tele Macro function works in both <Camera> and <M.Cam> mode. ➥page 19
✤ Effective focal distance in Tele Macro mode is 50 Cm (19.7 inches) ~ 100 Cm
(39.4 inches).
1. Press the [MACRO/PB ZOOM] button.
■
Tele Macro ( ) icon is displayed.
2. If you want to cancel the Tele Macro function, press the [MACRO/PB ZOOM] button
again.
[ Notes ]
■
When recording in Tele Macro mode, the focus speed may be slow.
■
When you operate the Zoom function in the Tele Macro mode, the recording subject may
be out of focus.
■
Use a tripod to prevent hand shake in the Tele Macro mode.
■
Avoid shadows when recording in the Tele Macro mode.
■
As the distance to the subject decreases, focusing area narrows.
■
When you can not get proper focus, use the [Zoom] lever.
C
O
LO
R
N
IT
E
LIG
HT
MACRO
PB ZOOM
TELE
WIDE
SP
25min
0:39:40
STBY
œ
W T
00970A SCD363 USA~043 1/12/06 3:28 PM Page 39