Filter
Top Products
6565
ENGLISH
Playback
Tape Playback on TV Screen
✤ The Playback function works only in <Player> mode. ➥page 19
Playing back on a TV Monitor
✤ To play back a tape, the television must be NTSC compatible. ➥page 101
✤ We recommend that you use the AC Power adapter as the power source
for the Camcorder.
Connecting to a TV that has Audio/Video Input Jacks
1. Connect the Camcorder to your TV with the Audio/Video Cable.
■
The yellow jack: Video
■
The white jack: Audio(L)-mono, The red jack: Audio(R)
■
If you connect to a mono TV, connect the yellow jack (Video) to the
video input of the TV and the white jack (Audio L) to the audio input of
the TV.
2. Set the [Power] switch to [PLAYER].
3. Set the [Mode] switch to [TAPE]. (SC-D375(H)/D975 only)
4. Turn on the TV and set the TV/VIDEO selector on the TV to Video.
■
Refer to the TV user’s manual.
5. Play the tape. ➥page 60
[ Notes ]
■
If you connect the cable to the AV jack, you will not hear sound from the Camcorder's speaker.
■
If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
SC-D371/D372
SC-D375(H)/D975
œ
œ
Camcorder
Audio/Video
Cable
Signal flow
TV
Audio/Video
Cable
01227A SCD371 USA~071 2/1/07 9:39 AM Page 65