Filter
Top Products
10 – DIGITAL COLOR DOME CAMERA
Installation
C
B
A
Bottom of camera
Installing camera
Before installation
Before installing your camera, you have to read the following cautions:
You have to check whether the location (ceiling or wall) can bear fi ve times the weight of your camera.
Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may
cause a breakdown or fi re. You can use wall mount adaptor (SADT-102WM), and pole mount adaptor (SADT-
100PM) for installing the camera on the wall or pipeline.
When installing your camera, don’t allow any person to approach the installation site. If you have any valuable
things under the place, move th
em away.
About the installation holes
A:Use these holes when directly installing your camera on the ceiling or
wall.
While those are not used, fi ll in the holes using the screw machine (M5
X L6.) for waterproofi ng.
B:
Use four holes when directly installing your camera on the junction box
You can use the 4 1/8 diameter round type junction box for assembly.
(The junction box, gasket, and cover are separately purchased items.)
C:
Use these holes when installing the wall mount adapter (SADT-
102WM)
While those are not used, fi ll in the holes using the screw machine (M5
X L6.)
for waterproofi ng.
The holes that are not used should be tightly
sealed up using the screws provided for
waterproofi ng. When the screws don’t have rubber
rings inside or are not closely attached, note that it
can cause waterproofi ng problem.
For attaching screws, see page 16
“Disassembling/assembling the Main body from
the Case.”
I
B
e
ar
e
T
o
1.
2.