Filter
Top Products
E
18
Connecting Cables and Checking Operation
1 First, connect the connector of the BNC cable to the Video Out terminal
2 Second, connect the other connector of the BNC cable to the Video In
terminal.
3 Then, connect the power adapter. Connect a part of the power adapter
composed of 2 lines to the Camera Power In terminal with a flat-head
driver as follows.(GND : marked with a white line)
* Power source may be AC24V or DC12V irrespective of polarity
BNC cable
Video Out Terminal
Video In Terminal of
Monitor Rear Surface
00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘`18