Filter
Top Products
22 23
22 23
ENG
If you keep pressing the LEFT/RIGHT Setup switch, shutter speeds
toggles in the following order:
OFF AUTO X2 AUTO X4 AUTO X6 AUTO X8
AUTO X12 AUTO X16 AUTO X24 AUTO X32 AUTO X48
AUTO X64 AUTO X96 AUTO X128 AUTO X256 OFF
1/100 (NTSC), 1/120 (PAL) 1/250 1/500 1/1000 1/2000
1/4000 1/10K
Note
When the IRIS mode is ELC or WDR, you cannot use high speed
shutters.
❚
AGC
The AGC (Auto Gain Control) menu is used to set the AGC level
of the camera. When the AGC is active, the camera automatically
increases the sensitivity by amplifying the Video signal when the
strength of the signal falls below the normal value.
Only when OFF or a high speed shutter is selected in the
SHUTTER menu, you can set the AGC level.
You can select any of OFF, LOW, and HIGH.
Note
When the DAY/NIGHT is set to AUTO, the AGC is displayed with
--- so you cannot change its setting.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC LOW
MOTION DET OFF
DAY/NIGHT DAY...
WHITE BAL ATW2
PRIVACY OFF
SPECIAL ...
RS-485 ...
EXIT QUIT
SCC-B2315_Eng_TUR.indd 23 2007-06-07 ｿﾀﾈﾄ 1:48:03