Filter
Top Products
E
34
The INT mode is necessary for using the internal synchronization and
the LINE... mode is necessary for the operation of multi cameras
because it synchronizes the camera phase by using the external
signal(AC Signal). A little phase deviation for some sets may be aligned
by adjusting the PHASE. The SYNC function is available only with AC
power source. Put the cursor on the LINE..., press the LEFT/RIGHT key
to select the LINE... item, and press the [ENTER] key. Now, you will see
the submenu to adjust the PHASE. The PHASE ranges from -106H to
+106H(NTSC), -138H to +138H(PAL).
When you use DC power source, the SYNC Menu is full --- and you can
not use the SYNC function.
SYNC
press the
[ENTER] key
CAMERA ID OFF
IRIS ALC...
BLC OFF
COLOR/BW COLOR...
SHUTTER AUTO X8
MOTION F.FAST
WHITE BAL ATW
SYNC LINE...
SPECIAL ...
EXIT QUIT
(LINE LOCK)
PHASE (000) ----I----
RET
press the
[Left/Right]
key
(AWB/MANU)
PRESET 3200K
RET
(AWB/MANU)
BURST OFF(USER)--
RED (00) ----I----
BLUE (00) ----I----
RET
00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘`34