Filter
Top Products
24 – DIGITAL COLOR CAMERA
How to use OSD Menu
PRIVACY ZONE SET1
PIXEL LEVEL [4]
<POINT>
<POSITION>
- How to set the point
You can set each position of the 4 points.
① If you press the SETUP switch in <POINT>,
you will see the points available in the
PRIVACY ZONE. Each time you press the
SETUP switch, the points available will move.
② Use the
cdef
switch to set the position
of each point. Set each position of the four
points and press the SETUP switch to
complete the positioning.
- How to set the position
You can move the position of the overall area.
① By pressing the SETUP switch in
<POSITION>, you can move the overall
position of the privacy zone.
② Use the
cdef
switch to move the
position and press the SETUP switch to
confi rm it.
Note :
If more than one PRIVACY ZONE is specifi ed and the
PRIVACY SET is set to ON, the PIP function will be
deactivated.
If the 12th PRIVACY ZONE is specifi ed, the LINE function
of FENCE will be deactivated.
–
–
OTHER SET
eOTHER SETf
EXTERNAL TRG OFF
FACTORY DEFAULTS
OSD COLOR BW
EXTERNAL TRG
Set the EXTERNAL TRG menu to ON and press
the SETUP switch to display the appropriate
screen.
EXTERNAL TRG
STILL TIME OFF
DELAY TIME FIX
You can set the STILL TIME to 0~4 seconds.
If DELAY TIME is set to FIX, the DELAY TIME will
be set in sync with the STILL TIME; if set to USER,
the DELAY TIME will be set to your setting.
FACTORY DEFAULTS
All the settings will be restored to the factory
default.
However, the settings of PROTOCOL, BAUD
RATE, ADDRESS and LANGUAGE will not be
restored to the default.
OSD COLOR [BW, R/G/B]
You can set the OSD(On-screen Display) color to
COLOR or B/W.
❖
–
❖
❖
S
Y
Yo
u
ca
m
L
A
Th
e
Se
l