Filter
Top Products
8
ENG
9
Components of your camera
Your camera has the following components:
1. Cover dome: Covers the inner cover, lens, and main
body to protect them.
2. Inner cover
: Covers the main body to protect it.
3. Wing locker
: Push a long thin screwdriver into its
narrow spot and press it outward when you want to
remove the inner cover.
4. Main body
: Includes a lens, a switch board, a PCB
board, screws, and such.
5. Mount bracket: Used as a ceiling or wall fixture. It
is fixed using three long tab screws provided in the
package.
6. Ceiling mount opener
: Remove it for line connection
to the ceiling when it is installed on the ceiling.
7. Zoom lever: Using this lever, the lens zoom can be
adjusted and fixed.
8. Focus lever: The lens focus can be adjusted by
rotating it left or right. Rotate it clockwise for fixing.
9. Tilt fixing screw: Using this screw, the slope of the
lens can be adjusted and fixed.
10. Switch board
: Includes two kinds of control switches
such as function switches and phase-control switches.
The board has eight function switches in the middle
and two phase-control buttons on each side of the
function switch area.
11. Groove mark: To attach the
Main body to the Mount
bracket, align this groove mark on the Main body with
the wide groove in the CAMERA FRONT side on the
Mount bracket.
12. Locker
: Used to open or close the Cover dome. To
open the cover dome, press the locker.
13. Lock releaser
: Push it outward and rotate the main
body in UNLOCK direction when you want to remove
the Mount bracket from the Main body or to remove
the installed camera from the Mount bracket.
14. Cable: Connect the Video connector to BNC cable
and Power connector to power adapter.
3
1 2
4
Lens
9 0 !
$
Power connector
Video connector
7
8
#
@
6
5
AB68-00648C(01)Eng.indd 9 2007-03-19 ¿ÀÀü 10:34:43