Filter
Top Products
40_ setup
setup
Select each item and set appropriately.
POSITION : Set the starting and ending
positions for the <AUTO PAN>.
Move to the setting screen and adjust
pan/tilt to the desired starting position,
and then press [ENTER].
Again, adjust pan/tilt to the desired
ending position and press [ENTER] to
finish <AUTO PAN> setup.
DIRECTION : Sets the direction of the camera’s movement from the starting to
the end position. (Based on panning)
ENDLESS : Instead of shuttling between start and end positions, the camera
turns 360° endlessly while stops for the <DWELL TIME> at both positions.
SPEED : Sets the moving speed of the camera, from 1 to 64.
DWELL TIME : Sets the dwell time at the starting and ending positions, from
1 to 60 seconds.
3.
<RIGHT> <LEFT>
START START
END
END
AUTO PAN 1
POSITION
DIRECTION LEFT
ENDLESS OFF
SPEED
[10]
DWELL TIME 3SEC
00956B-NA_SCC-C7453N-ENG.indb 40 2009-08-13 오후 10:58:42