Filter
Top Products
Version 1.1
- 5 -
2.
Precautions
■
Avoid aiming the camera directly towards extremely bright objects such as sun,
as this may damage the CCD image sensor.
■
Do not use the camera in the extreme environments.
-
Extremely hot or cold place such as radiators, heat registers
(
Operating condition
-10
℃
~+50
℃
,
under
90%
humidity)
-
Close to generators of powerful electromagnetic radiation.
-
The place which is subject to light reflections, unstable lighting conditions,
strong vibration.
■
Remove dust or dirt on the surface of the CCD with
a
blower.
■
Do not apply excessive voltage.
(
Operating Power Input
:
DC
9V ~ 15
V)
■
The following phenomena that may appear in images are specific to CCD.
They do not indicate malfunctions.
-
White Flecks
:
The fleck especially tend to be seen when operation at
a
high
environmental temp. or when you have raised the master gain and
use in sense-up function.
-
Vertical Smear
:
When an extremely bright object, such as
a
strong spotlight or
flashlight, is being shot, vertical tails may be produced on the screen,
or the image may be distorted.
-
Alias
:
When fine patterns, stripes, or lines are shot, they may appear or flicker.
■
Do not drop objects on the product or apply strong blows to it.
■
Do not install the unit in humid, dusty, or sooty locations.
Doingsomaycausefireorelectricshock.