Samsung SCO-2080RP Security Camera User Manual


  Open as PDF
of 19
 
COLOR CCD CAMERA User Guide
12
COLOR CCD CAMERA User Guide
13
Connecting to Monitor
Please connect the video output terminal located on the back of the camera to the monitor.
CCDCamera
Monitor
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
Connection
The recommended adaptor specification for SCO-2080RN/P is DC 12V/4A, AC
24V/2A over.
Please check the standard power requirement before connecting the power.
( Recommend AC 24A/2A over adaptor for a long-distance.)
Connecting to Power
Whentheresistancevalueofcopperwireisat[20°C(68°F)]
Copperwiresize(AWG)
#24(0.22mm
2
) #22(0.33mm
2
) #20(0.52mm
2
) #18(0.83mm
2
)
Resistancevalue(Ω/m) 0.078 0.050 0.030 0.018
Voltagedrop(V/m) 0.028 0.018 0.011 0.006
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore having an excessively long distance between the power adaptor and the
camera may affect the camera's performance.
✽Standardvoltageforcameraoperation:DC12V±10%/AC24V±10%
✽Theremaybesomedeviationinvoltagedropdependingonthetypeofwireandthemanufacturer.
•Pleaseuseapoweradaptorthatmeetstherequiredstandards.
•Pleaseconnectthepowerafterinstallation.
Notes
 previous next