Filter
Top Products
COLOR CCD CAMERA User Guide
32
COLOR CCD CAMERA User Guide
33
SPECIAL SETUP
PRIVACY ON
DAY/NIGHT AUTO
1. Press the Function Setup Switch to access the main setup menu and then position the
indicator over 'SPECIAL' by moving the up or down direction of the Function Setup Switch.
2. Press the Function Setup Switch to confirm.
PRIVACY : Hide an area you want to hide on the screen.
When the SPECIAL menu screen is displayed, by
moving the up or down direction of the Function Setup
Switch so that the arrow indicates ‘PRIVACY’.
Set up the mode using the 4 direction buttons.
- AREA SEL : You can select up to 12 MD areas.
- AREA MODE : Determines whether to use the area selected in the AREA SEL.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White,
Gray.
PRIVACY SETUP
▶AREA SEL AREA1
AREA MODE ON
MASK COLOR GRAY
TOP 39
BOTTOM 79
LEFT 14
RIGHT 53
RETURN
|||||
|
|||||||||||||||||||
|||||||
|
|||||||||||||||||
|
|||||||||||||||||||||||||
|||||
|
|||||||||||||||||||
Operating Your Camera
SPECIAL SETUP
PRIVACY OFF
DAY/NIGHT AUTO
DIS OFF
DAY/NIGHT : You can display pictures in color or black and white.
When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by moving the up or
down direction of the Function Setup Switch so that the arrow indicates 'DAY/NIGHT'.
Select a desired mode by moving the left or right direction of the Function Setup
Switch according to the picture display you want.
• DWELL TIME : You can select tday/night switching delay time from.
5,7,10,15,20,30,40, 60(sec)
• DURATION : You can select the day/night switching point(lux).
AUTO SETUP
IR MODE MANUAL
▶
COLORB/W -
DWELL TIME 5 SEC
DURATION SLOW
B/WCOLOR -
DWELL TIME 5 SEC
DURATION SLOW
RETURN
BURST MODE SETUP
▶
BURST MODE ON
IR MODE MANUAL
RETURN
When AGC is middle mode.
Color → B/W B/W → Color
Fast 0.7lux 5lux
Slow 1lux 3lux
BURST LEVEL SETUP
▶
BURST LEVEL 50
RETURN
||||||||||||||||||||||
|
- AUTO : The mode is switched to 'Color' in a normal
environment, but switches to 'B/W' mode
when ambient illumination is low. To set up
the switching time or speed for AUTO mode,
press the Function Setup Switch.
· IR MODE AUTO :
The IR LED is controlled automatically
according to brightness of object
which is situated on screen center.
· MANUAL : You can control WIDE LED and NARROW
LED step from 0 to 32.
· OFF : Disabled.
*
LED ON : Only B/W mode.
IR LEVEL SETUP
▶
WIDE 32
NARROW 32
RETURN
IR LEVEL SETUP
▶
WIDE 32
NARROW 32
RETURN
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and
white.