Filter
Top Products
10 – COAXIAL REMOTE CONTROLLER
Introduction
Top❖
USB Port
-
This terminal is used for updating the product’s fi rmware.
RS-232 Port (9-pin D SUB)
- Used to control remotely using RS-232 communication.
RS-485 Port (4-pin)
- Used to control remotely using RS-485 communication.
VIDEO IN/OUT Connector (BNC)
- VIDEO IN receives coaxial communication from cameras, and VIDEO OUT
outputs the video signal.
DC12V Power Connector (2-PIN)
- Used for connecting DC12V power source.
❶
❷
❸
❹
❺
OUT IN
TX RX
ADDRESS
(X)100 (X)10 (X)1
POWER
OFF ON
CABLE
COMPENSATION
SL
REMOTE CONTROLLER SCX-RD100
POWER STATUS
TERMINATION PROTOCOL
1
ON
23456781
ON
2
RS-232C
VIDEO
DC 12VRS-485
n opqr
C
I
N