Filter
Top Products
20 21
COLOR CCD CAMERA COLOR CCD CAMERA
If you have trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact
an authorized technician.
Problem
Nothing appears on the
screen.
The image on the screen
is dark.
The image on the screen
is dim.
The camera is not work
properly, and the surface
of the camera case is hot.
Solution
• Check that the power cord and line connection
between the camera and monitor are made
properly.
• Check that the DC/VIDEO selection switch on the
rear of the camera is set to a proper position
according to the type of your auto iris lens.
•
Check that you have set ESC feature
• Check if the lens are stained. If
dirty, clean the lens with soft,
clean cloth.
• Check that you have connected the
camera to a proper power.
Troubleshooting
Problem
The color of the picture is not
matched.
The image on the screen
flickers.
Solution
• Check that you have properly set White Balance
Control Mode.
• Does the camera face to directly to the sun or
fluorescent lighting?
Change the camera position.
• Check that the DC/VIDEO selection switch on
the rear of the camera set to a proper position
according to the type of your auto iris lens.
The contrast on the screen
is too weak.
• Adjust the contrast feature of the monitor.
• If the camera is exposed under too strong light,
change the camera position.
The image on the screen is
distorted.
• Check that you have used 50Hz (PAL models),
60Hz(NTSC models) the linelock synchronization
mode cannot be used.
Use the Synchronization Mode to INT mode.